Used phone checklist: the 10-minute check before you pay
Check the IMEI against a lost-and-stolen list before you meet. At the meetup, watch the seller remove their account and reset the phone, match the IMEI, read battery health, then test the screen, sound, cameras, buttons, sensors, charging and signal. It takes about 10 minutes.
What should I check before meeting the seller?
Do the paperwork at home. Ask the seller for:
- The IMEI. On an iPhone it is in Settings > General > About. On a Pixel and most Android phones it is in Settings > About phone. Dual-SIM phones list a second IMEI there too.
- A screenshot of battery health (where to find it is below).
- Real photos of the front, back and edges.
- Proof of purchase, and confirmation that the phone is fully paid off.
Then run the IMEI through a lost-and-stolen check. GSMA Device Check shows whether a number is flagged on the GSMA Block List; in the US, CTIA's Stolen Phone Checker uses the same data. A clean result does not replace the lock checks at the meetup.
What should I look at on the outside?
Spend the first minute in good light, case off.
- Frame: dents, bends, and any gap where the screen meets the frame. A screen lifting away from the frame is a reason to stop.
- Glass and lenses: cracks, chips and haze, front, back and on each lens.
- Ports and buttons: look into the charging port, which Which? says is often the first part to fail. Buttons should click firmly.
How do I check if a used iPhone is locked?
Apple is blunt about this: if an iPhone is Activation Locked, do not buy it. Activation Lock is designed to stop anyone but the owner from using the phone. Here is the sequence Apple describes:
- Turn it on and wake it. If you see a passcode lock screen or the Home Screen, the phone has not been erased. Ask the seller to erase it now, while you watch.
- Wait for the Hello screen. "Hello" in many languages means the phone has been erased. To test it, you then need to set it up, including activating it.
- Watch what setup asks for. If it asks for the previous owner's Apple Account, or shows iPhone Locked to Owner (iOS 15 and later), it is still linked to them. Hand it back so they can enter their password. If they cannot, walk away.
Once set up, open Settings > General > About and find Network Provider Lock. "No SIM restrictions" means the iPhone is not locked to one carrier.
How do I check the Google lock on a used Android phone?
Android's equivalent is device protection, often called Factory Reset Protection (FRP). With a Google Account and a screen lock on the phone, a reset asks for the screen lock or a Google Account that was on it. Without that, Google says, you won't be able to use the device at all.
- The seller removes their account. On many phones it is Settings > Passwords & accounts > the account > Remove account. Google lists other labels, such as Users & accounts or Manage accounts, because menus vary.
- The seller resets from Settings, in front of you. Samsung says a reset through Settings does not trigger the protection, while a reset through the recovery menu asks for the Google Account and password.
- Start setup. If it asks you to verify the previous owner's Google Account, the phone is still protected. Do not pay.
Does the IMEI on the phone match the box?
Compare the IMEI in Settings with the number you checked at home and with the label on the box. On iPhone, Apple also lists it on the SIM tray on iPhone 6s to iPhone 13 and iPhone SE (2nd and 3rd generation); iPhone 14 and later have no engraving. GSMA notes that a mismatch between a report and the device can point to a counterfeit or a tampered identity. Any mismatch is a reason to leave.
Where do I see battery health on iPhone and Android?
- iPhone: Settings > Battery > Battery Health. Apple's pre-owned guide notes the screen is called Battery Health & Charging on some versions. Maximum Capacity compares today's capacity with when the battery was new.
- Pixel 8a and later: Settings > Battery > Battery health. "Reduced" means capacity is below 80%. The cycle count is in Settings > About phone > Battery information. Pixel 6a to Pixel 8 Pro do not show a health status.
- Samsung Galaxy: open Samsung Members, then Diagnostics > Phone diagnostics, and run Battery status. On Android 12 and later it is also under Settings > Device care > Diagnostics.
What the percentage means for the price is in Battery health explained: what 80% really means.
How do I test the screen, sound, cameras and sensors?
- Screen and touch: look at a white page and a dark page for spots and tints, then drag an icon to every corner. Taps that fire on their own are covered in Ghost touches: causes and fixes.
- Speakers and microphones: make a short call on speaker and on the earpiece, then record a voice memo and play it back. If it sounds dull, read Muffled phone speaker before you haggle.
- Cameras: every lens and zoom level, tap to focus, flash on.
- Buttons and biometrics: volume up, volume down, power, then set up Face ID or the fingerprint sensor.
- Sensors: rotate the phone to see the screen turn; during the call, cover the top of the phone and the screen should go dark.
- Charging and signal: plug in a charger, try your SIM, Wi-Fi and a map app.
This is the part PhoneProof automates: the phone records its own speaker, maps touch square by square, checks each lens focuses and adjusts exposure, and times a GPS fix. How the checks work explains each one. It still asks you to judge the colour screens by eye, and on iPhone you type battery health in from Settings.
How do I check a used phone's repair history?
On iPhone with iOS 15.2 and later, go to Settings > General > About. A Parts and Service History section appears only if the phone has been repaired, listing parts such as the battery, display and cameras, depending on the model. "Genuine" means Apple parts and processes. "Unknown" means a part may not be genuine or could not be verified, which Apple says might affect trade-in value. "Used" means the part came from another iPhone.
We found no official equivalent for Android phones, so ask for repair receipts.
The used phone checklist, in order
- At home: IMEI checked, battery screenshot, real photos, proof of purchase.
- Outside: frame, screen, back, lenses, port, buttons.
- Account and reset: seller's account removed, reset in front of you, setup does not ask for their account.
- IMEI: matches the box and your check. iPhone: no SIM restrictions.
- Battery health: read it in Settings or diagnostics.
- Screen and touch: no spots, every corner responds.
- Sound: call on speaker and earpiece, voice memo played back.
- Cameras: every lens, focus, flash.
- Buttons, sensors, biometrics: all respond.
- Charging, signal, repairs: charges, your SIM works, GPS finds you, parts history read.
What should I do in the first hour after paying?
- Sign in with your own account and turn on your own phone-finding and lock features.
- Install every software update. Which? calls security support one of the most important things to consider, so check how many years of updates the model has left. Our best-value used phones, by budget takes this into account.
- Keep the chat history, the listing and a receipt with the IMEI on it.
- Use it hard for an evening. Some faults only show up with use, and it is easier to raise them while the seller is still reachable.
For the technically curious
The IMEI is the electronic serial number a phone uses on mobile networks. Operators flag lost or stolen IMEIs in the GSMA Device Registry to help block them; GSMA Device Check reads it, with data from over a hundred carriers, and CTIA's US checker is built on it. Activation Lock and Google's device protection are separate: they are tied to the owner's account, not a network list, so a phone can pass a blocklist check and still be locked. Neither covers finance status.
If you want the hardware part done for you, PhoneProof is coming soon to the App Store and Google Play.
Frequently asked questions
How long does it take to check a used phone?
About 10 minutes at the meetup, if you checked the IMEI before you went. The account removal and reset take the longest. The hardware checks take five or six minutes if you go in order.
Is a factory reset in front of me enough?
It is the key step, but finish the setup too. If the phone asks for the previous owner's Apple Account or Google Account, or an iPhone shows iPhone Locked to Owner, it is still locked. Hand it back and do not pay until the seller has removed it.
Can an app tell me if a phone is stolen or still being paid for?
No app on the phone can see that. PhoneProof does not check theft, carrier lock or payment status. Run the IMEI through a lost-and-stolen check such as GSMA Device Check, or CTIA's Stolen Phone Checker in the US, and ask the seller for proof of purchase.
What battery health is acceptable on a used phone?
Google marks a Pixel battery as Reduced once its capacity is below 80%. Apple designs iPhone 14 models and earlier to keep 80% after 500 full cycles, and iPhone 15 models after 1,000. Below 80%, budget for a new battery or ask for a lower price.
Sources
- Apple Support: If you want to buy a pre-owned iPhone
- Apple Support: Activation Lock for iPhone and iPad
- Apple Support: About iPhone Parts and Service History
- Apple Support: iPhone battery and performance
- Apple Support: Find the serial number or IMEI on your iPhone, iPad or iPod touch
- Android Help: Help prevent others from using your device without permission
- Android Help: Add or remove an account on Android
- Samsung US: Google Device Protection on your Galaxy phone or tablet
- Pixel Phone Help: Understand your Pixel battery
- Pixel Phone Help: Find your IMEI and other Pixel phone ID numbers
- Samsung US: Check your Samsung Galaxy device status and run diagnostics
- GSMA Device Check: FAQs
- GSMA: GSMA Device Check powers CTIA's stolen device checker service
- Which?: How to buy a second-hand or refurbished mobile phone
Check it before you pay for it.
PhoneProof runs up to 30 hardware checks on the phone in your hand and gives one score out of 100. Free, no account, no ads.